AIR INVERTERS / SHOOTERS – VARIOUS SIZES AND STYLE

3″- 6″ Aluminum Lateral Drum/Tank Air Inverter

Quality aluminum and guarantee high service life. Air pressure inversion tank. 4″ liner capacity up to 99 feet, or 5″ liner capacity up to 76 feet, and 6″ liner capacity up to 53 feet.     SKU# AI-36

3″-8″ Lateral Lining Bladder Gun

Stackable for Mainline Lining. Can clamp two Shooters on top if bladder blows. Fits in tight quarters. Requires 70 cfm air compressor and pressure lube tank. Interchangeable liner adapter. Lightweight (30 lbs. approx.). Adjustable Legs. Steam caps or water cap fits on top.     SKU# AI-38

6″-12″ Continuous Air Inverter

Great for mainline 6″-12″ CIPP lining. Inverts/shoots up to 12″ CIPP liners. Shoots 3″ and 4″ liners with additional fittings. The Unit will air invert the liner and then steam cure without dropping air pressure within the liner. (375 CFM min)      SKU# AI-612

6″-12″ Continuous Air inverter Adapter

Converts THE SHOOTER® by Emagineered to Fast Pipe Shooter Seal, Inverts/shoots up to 12″ CIPP liners.      SKU# AI-612AIA

6″-18″ Continuous Air Inverter

Great for mainline 6″-18″ CIPP lining. Inverts/shoots up to 18″ CIPP liners. Shoots 4″ liners with additional fittings. The Unit will air invert the liner and then steam cure without dropping air pressure within the liner. (375 CFM min)    SKU# AI-618

30 Series (18″-30″) Air Inverter

Inverts/shoots up to 30” CIPP liner. The key features to appreciate for any liner inversion are the Hydraulic Ram (Double Gland) powered pinch point with a control valve and 110V Power over Hydraulics (noiseless during installation).    SKU# AI-1830

48 Series (18″- 48″) Air Inverter

Inverts/shoots up to 48” CIPP liner. Key Features to appreciate for any liner inversion are the 5 hp Honda Engine, 4 Hydraulic Rams that move simultaneously on the Pinch Point, and the 12V Winch for turning the liner remotely.    SKU# AI-1848

72 Series (18″-72″) Air Inverter

Inverts/shoots up to 72” CIPP liner. Key Features to appreciate for any liner inversion are 5 hp Honda Engine, 4 Hydraulic Rams that move simultaneously on the Pinch Point, and 2V Winch for turning the liner remotely. The combination of all these special features within this Air Inverter is guaranteed to take the labor out of any CIPP lining. The combination of all the special features within this Air Inverter is guaranteed to take the labor out of any CIPP lining. SKU# AI-1872

96 Series Air Inverter (18″-96″)

Inverts/shoots up to 96” CIPP liner. Some of the Key Features any Pipeliner will Appreciate are the 13hp Honda Engine, 6 Hydraulic Rams that move simultaneously on the Pinch Point, and a Pressure Reader to fine-tune the pinch point, no measuring tape is needed.     SKU# AI-1896