Air Inverter/Shooter Units

CURED-IN-PLACE-PIPE (CIPP) AIR INVERTER/SHOOTER

No matter how BIG or small your CIPP lining job is, it is always good practice to have the proper tools and equipment for CIPP lining. We are here to serve you and are dedicated to providing all essential tools to help you run your CIPP lining project smoothly with no margin of errors.

EQUIPMENT PURCHASE/DELIVERY TERMS & CONDITIONS

  • Prices do not include Taxes, Shipping, and Handling cost, and will be determined at shipment.
  • 50% deposit due on all orders.  Balance payment due before equipment shipped.
  • All units/equipment: FOB La Salle, Illinois.
  • Free training at our La Salle, Illinois facility, the customer pays travel & lodging expense. Onsite training is available at an additional cost.
  • Optional: Change of paint color available upon request at additional cost.

     NOTE: Please keep in mind that because of the type of liner materials used and with the different types of coating and millimeter thickness, the thickness will affect inversion air pressure during inversion.

3"-8" Continuous Air Inverter/Shooter - Recommended Package Deal $18,355.00 USD

3-8 Continuous Air inverter: Great for mainline 6"-8" CIPP lining. Inverts / Shoots up to 8" CIPP liners - (AI-3800)
* Shoots 3" liner with additional fittings (see opts below)
* Unit will air invert liner then steam cure without dropping air pressure within the liner. (375CFM min)
* Adjustable Tongue & includes Adjustable Leg set.
* 2" NPT Main Inlet
* 4", 6", 8" liner adapter cans
* (3) 3-8 Felt Gaskets

Includes:

* A-Station - 3" main, 2" auxiliary air connections (A2X2X1X1) (For small portable steamers)
* B-Station (Steam Station) (B2ALBOX) 2"
* 6-18" Liner Clamp (618LC) (for use with stab pipe)
* 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (2SPBS) (needed for use with 6-18 liner clamp)
* Chain Vise grips extended chain (secures liner to Liner adapter). Two are needed for any liner project.

3"-8" Continuous Air Inverter/Shooter (Basic) $11,900.00 USD

3-8 Continuous Air inverter: Great for mainline 6"-8" CIPP lining. Inverts / Shoots up to 8" CIPP liners - (AI-3800)
* Shoots 3" liner with additional fittings (see opts below)
* Unit will air invert liner then steam cure without dropping air pressure within the liner. (375CFM min)
* Adjustable Tongue & includes Adjustable Leg set.
* 2" NPT Main Inlet
* 4", 6", 8" liner adapter cans
* (3) 3-8 Felt Gaskets

The following are accessories recommended for the 3"-8" Continuous Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• A-Station - 3" main, 2" auxiliary air connections (For small portable steamers) - (A2X2X1X1) $3950
• A-Station - 2" main, 2" auxiliary air connections (A2X22) (not for use with small portable steamers) - (A2X22) $2900
• B-Steam Stations - 2" - (B2ALBOX) $950
• B-Station - Steam Sample Box - Fast and easy to cure CIPP flat plate samples to prepare CIPP samples for testing. This unit connects between the liner and "B" Steam Station. One Set of 15" by 15" Sample Holder Plates, Additional Sample Plate Holders Available. Sample Plate Spacers - 4.5mm, 6.0mm, 7.5mm & 9mm & 12mm 15mm - Custom Sizes Available. 3" Inlet & Outlet Camlock Connections, Digital Read-Out Thermocouple Meter, Waterproof Accessory Storage Case. Pneumatic Tires. (BSSB3) $2500
• 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (needed for use with 6-18 Liner Clamp) - (2SPBS) $795
• 2" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (3SP) $125
• Mini Steam Generator Unit: Perfect for small diameter cured-in-place pipe installations. Being a compact unit, it produces desired dry steam for curing liners, portability, and minimal power requirements make it ideal for lateral cured-in-place pipe lining work where limited workspace is available. (ACWC70) $8500
• Air compressor w/ dryer: 70 CFM / 150psi - Air Compressor weigh approx. 300 lbs. Can fit through the smallest of openings, yet powerful enough for the largest of job sites. Recommended air cooler added on for water extraction, with an output of 90°F/32.22°C. The retractable handle and pneumatic tires make it manually transportable by one person. (ACWC70) $11499
• Steam Cap, Gasket & Circular Clamp - (SC12T3) $695
• 3-8 Felt Replacement Gasket - (3809) $225
• 3" Liner Adapters - (ALCO3) $550
• 4" Liner Adapters - (ALCO4) $550
• 6" Liner Adapters - (ALCO6) $550
• 8" Liner Adapters - (ALCO8) $550
• Pressure Lubricating Tank with valve, regulator, connection hose & sprayer head - (OT5) $525
• 6" End Steam Can (6SC) $515
• 8" End Steam Can (8SC) $530
• Travis Clamp - metal clamp - (CL312) $32.50
• Travis Clamp Gasket - (61847) $45
• 1" Steam Hose w/ 1" Boss Ground Joint Fittings (1 for each 246 Steamer) - (1SHGJ) $395
• 2" Steam Hose w/ 2" Boss Ground Joint Fittings (For A-station Up to 12" lining) 1st one is for A-station to the Shooter, 2nd one's needed for air compressor. (2SHGJ) $595
• 3" Steam Hose w/ 3" Boss Ground Joint Fittings (for A-station over 12" lining, hook up A-Station to the Shooter). (3SHGJ) $795
• 3" Steam Hose w/ 3" Cam Lock Fittings (2 for B-station) over 12" lining. (3SHCL) $695
• 2" Steam Hose w/ 2" Cam Lock Fittings (2 for B-station) Up to 12" lining. (2SHCL) $495
• 6-18" Liner Clamp (for use with stab pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with stab pipe) - (9618LC-HD) $640
• Chain Vise-Grips w/Extended Chain (secures liner to Liner adapter) Need 2 - (61847) $110
• Bander Heavy Duty: (optional for securing the liner to the shooter, end steam cans or connecting to the liners together to cook as one). (BND-011) $268.95
• Banding 3/4" 304 Stainless Steel 100' roll - (B-SS-750) $225
• Buckles & Screws (25) - (BUK-25) $117.18
• T-Handle 5/32 - (THX-532) $14.90
• Exotherm Meter (must-have for curing) - (HH801B) $202.50
• Exotherm Meter Wire 500' roll (must-have for curing) - (HH500) $277.50
• Mineral Oil – 5-gallon container - (MO5) (used with the Pressure lube tank - OT5) $60

6" -12" Air Inverter/Shooter - Recommended Package Deal $23,350.00 USD

6 -12 Air Inverter: (inverts / shoots up to 12” CIPP liner) Basic Model with adjustable tongue, 3" NPT main inlet, 2" water inlet valve, internal pressurized oil lubrication. Comes with Adjustable legs that have (4) locking points. 6",8",10",12" liner adapters & (4) gaskets Unit can air invert liner then steam cure without dropping air pressure within the liner. Pressurized oil tank sold separately. (AI-61200)

Includes:

* A-Station - 3" main, 2" auxiliary air connections (A2X2X1X1) (For small portable steamers)
* B-Station (Steam Station) (B2ALBOX) 2"
* 6-18" Liner Clamp (618LC) (for use with stab pipe)
* 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (2SPBS) (needed for use with 6-18 liner clamp)
* Chain Vise grips extended chain (secures liner to Liner adapter). Two are needed for any liner project.

IMG_1812

6" -12" Air Inverter/Shooter (Basic) $16,895.00 USD

6 -12 Air Inverter: (inverts / shoots up to 12” CIPP liner) Basic Model with adjustable tongue, 3" NPT main inlet, 2" water inlet valve, internal pressurized oil lubrication. Comes with Adjustable legs that have (4) locking points. 6",8",10",12" liner adapters & (4) gaskets Unit can air invert liner then steam cure without dropping air pressure within the liner. Pressurized oil tank sold separately. (AI-61200)

The following are accessories recommended for the 6"-12" Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• A-Station - 3" main, 2" auxiliary air connections (For small portable steamers) - (A2X2X1X1) $3950
• A-Station - 2" main, 2" auxiliary air connections (A2X22) (not for use with small portable steamers) - (A2X22) $2900
• B-Steam Stations - 2" - (B2ALBOX) $950
• B-Station - Steam Sample Box - Fast and easy to cure CIPP flat plate samples to prepare CIPP samples for testing. This unit connects between the liner and "B" Steam Station. One Set of 15" by 15" Sample Holder Plates, Additional Sample Plate Holders Available. Sample Plate Spacers - 4.5mm, 6.0mm, 7.5mm & 9mm & 12mm 15mm - Custom Sizes Available. 3" Inlet & Outlet Camlock Connections, Digital Read-Out Thermocouple Meter, Waterproof Accessory Storage Case. Pneumatic Tires. (BSSB3) $2500
• 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (needed for use with 6-18 Liner Clamp) - (2SPBS) $795
• 2" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (3SP) $125
• Mini Steam Generator Unit: Perfect for small diameter cured-in-place pipe installations. Being a compact unit, it produces desired dry steam for curing liners, portability, and minimal power requirements make it ideal for lateral cured-in-place pipe lining work where limited workspace is available. (ACWC70) $8500
• Air compressor w/ dryer: 70 CFM / 150psi - Air Compressor weigh approx. 300 lbs. Can fit through the smallest of openings, yet powerful enough for the largest of job sites. Recommended air cooler added on for water extraction, with an output of 90°F/32.22°C. The retractable handle and pneumatic tires make it manually transportable by one person. (ACWC70) $11499
• Steam Cap, Gasket & Circular Clamp - (SC12T3) $695
• 3-8 Felt Replacement Gasket - (3809) $225
• 3" Liner Adapters - (ALCO3) $550
• 4" Liner Adapters - (ALCO4) $550
• 6" Liner Adapters - (ALCO6) $550
• 8" Liner Adapters - (ALCO8) $550
• Pressure Lubricating Tank with valve, regulator, connection hose & sprayer head - (OT5) $525
• 6" End Steam Can (6SC) $515
• 8" End Steam Can (8SC) $530
• Travis Clamp - metal clamp - (CL312) $32.50
• Travis Clamp Gasket - (61847) $45
• 1" Steam Hose w/ 1" Boss Ground Joint Fittings (1 for each 246 Steamer) - (1SHGJ) $395
• 2" Steam Hose w/ 2" Boss Ground Joint Fittings (For A-station Up to 12" lining) 1st one is for A-station to the Shooter, 2nd one's needed for air compressor. (2SHGJ) $595
• 3" Steam Hose w/ 3" Boss Ground Joint Fittings (for A-station over 12" lining, hook up A-Station to the Shooter). (3SHGJ) $795
• 3" Steam Hose w/ 3" Cam Lock Fittings (2 for B-station) over 12" lining. (3SHCL) $695
• 2" Steam Hose w/ 2" Cam Lock Fittings (2 for B-station) Up to 12" lining. (2SHCL) $495
• 6-18" Liner Clamp (for use with stab pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with stab pipe) - (9618LC-HD) $640
• Chain Vise-Grips w/Extended Chain (secures liner to Liner adapter) Need 2 - (61847) $110
• Bander Heavy Duty: (optional for securing the liner to the shooter, end steam cans or connecting to the liners together to cook as one). (BND-011) $268.95
• Banding 3/4" 304 Stainless Steel 100' roll - (B-SS-750) $225
• Buckles & Screws (25) - (BUK-25) $117.18
• T-Handle 5/32 - (THX-532) $14.90
• Exotherm Meter (must-have for curing) - (HH801B) $202.50
• Exotherm Meter Wire 500' roll (must-have for curing) - (HH500) $277.50
• Mineral Oil – 5-gallon container - (MO5) (used with the Pressure lube tank - OT5) $60

6" -18" Air Inverter/Shooter - Recommended Package Deal $28,105.00 US

6 -18 Air Inverter: (inverts / shoots up to 18” CIPP liner) Basic Model with adjustable tongue, 3" NPT main inlet, 2" water inlet valve, internal pressurized oil lubrication. Comes with Adjustable legs that have (4) locking points. 6",8",10",12" 15/18" liner adapters & (5) gaskets Unit can air invert liner then steam cure without dropping air pressure within the liner. Pressurized oil tank sold separately.
Includes:

* A-Station - 3" main, 2" auxiliary air connections (A2X2X1X1) (For small portable steamers)
* B-Station (Steam Station) (B2ALBOX) 2"
* 6-18" Liner Clamp (618LC) (for use with stab pipe)
* 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (2SPBS) (needed for use with 6-18 liner clamp)
* Chain Vise grips extended chain (secures liner to Liner adapter). Two are needed for any liner project.

IMG_1812

6" -18" Air Inverter/Shooter (Basic) $21,650.00 USD

6 -18 Air Inverter: (inverts / shoots up to 18” CIPP liner) Basic Model with adjustable tongue, 3" NPT main inlet, 2" water inlet valve, internal pressurized oil lubrication. Comes with Adjustable legs that have (4) locking points. 6",8",10",12" 15/18" liner adapters & (5) gaskets Unit can air invert liner then steam cure without dropping air pressure within the liner. Pressurized oil tank sold separately.

The following are accessories recommended for the 6"-18" Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• Wheel kit (WHK-612) - $1750
• A-Station - 3" main, 2" auxiliary air connections (For small portable steamers) - (A2X2X1X1) $3950
• A-Station - 2" main, 2" auxiliary air connections (A2X22) (not for use with small portable steamers) - (A2X22) $2900
• B-Steam Stations - 2" - (B2ALBOX) $950
• B-Station - Steam Sample Box - Fast and easy to cure CIPP flat plate samples to prepare CIPP samples for testing. This unit connects between the liner and "B" Steam Station. One Set of 15" by 15" Sample Holder Plates, Additional Sample Plate Holders Available. Sample Plate Spacers - 4.5mm, 6.0mm, 7.5mm & 9mm & 12mm 15mm - Custom Sizes Available. 3" Inlet & Outlet Camlock Connections, Digital Read-Out Thermocouple Meter, Waterproof Accessory Storage Case. Pneumatic Tires. (BSSB3) $2500
• 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (needed for use with 6-18 Liner Clamp) - (2SPBS) $795
• 2" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-station (optional for use with 6-18 Liner Clamp) - (3SP) $125
• Mini Steam Generator Unit: Perfect for small diameter cured-in-place pipe installations. Being a compact unit, it produces desired dry steam for curing liners, portability, and minimal power requirements make it ideal for lateral cured-in-place pipe lining work where limited workspace is available. (ACWC70) $8500
• Air compressor w/ dryer: 70 CFM / 150psi - Air Compressor weigh approx. 300 lbs. Can fit through the smallest of openings, yet powerful enough for the largest of job sites. Recommended air cooler added on for water extraction, with an output of 90°F/32.22°C. The retractable handle and pneumatic tires make it manually transportable by one person. (ACWC70) $11499
• Steam Cap, Gasket & Circular Clamp - (SC12T3) $695
• 3-8 Felt Replacement Gasket - (3809) $225
• 3" Liner Adapters - (ALCO3) $550
• 4" Liner Adapters - (ALCO4) $550
• 6" Liner Adapters - (ALCO6) $550
• 8" Liner Adapters - (ALCO8) $550
• Pressure Lubricating Tank with valve, regulator, connection hose & sprayer head - (OT5) $525
• 6" End Steam Can (6SC) $515
• 8" End Steam Can (8SC) $530
• Travis Clamp - metal clamp - (CL312) $32.50
• Travis Clamp Gasket - (61847) $45
• 1" Steam Hose w/ 1" Boss Ground Joint Fittings (1 for each 246 Steamer) - (1SHGJ) $395
• 2" Steam Hose w/ 2" Boss Ground Joint Fittings (For A-station Up to 12" lining) 1st one is for A-station to the Shooter, 2nd one's needed for air compressor. (2SHGJ) $595
• 3" Steam Hose w/ 3" Boss Ground Joint Fittings (for A-station over 12" lining, hook up A-Station to the Shooter). (3SHGJ) $795
• 3" Steam Hose w/ 3" Cam Lock Fittings (2 for B-station) over 12" lining. (3SHCL) $695
• 2" Steam Hose w/ 2" Cam Lock Fittings (2 for B-station) Up to 12" lining. (2SHCL) $495
• 6-18" Liner Clamp (for use with stab pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with stab pipe) - (9618LC-HD) $640
• Chain Vise-Grips w/Extended Chain (secures liner to Liner adapter) Need 2 - (61847) $110
• Bander Heavy Duty: (optional for securing the liner to the shooter, end steam cans or connecting to the liners together to cook as one). (BND-011) $268.95
• Banding 3/4" 304 Stainless Steel 100' roll - (B-SS-750) $225
• Buckles & Screws (25) - (BUK-25) $117.18
• T-Handle 5/32 - (THX-532) $14.90
• Exotherm Meter (must-have for curing) - (HH801B) $202.50
• Exotherm Meter Wire 500' roll (must-have for curing) - (HH500) $277.50
• Mineral Oil – 5-gallon container - (MO5) (used with the Pressure lube tank - OT5) $60

30 Series Air Inverter/Shooter - Recommended Package Deal $35,225.00 USD

18-30 Air Inverter - Base Model 30 Series: (inverts / shoots up to 36” CIPP liner) with a single gland. Non- powered roller. (2) Manual Hydraulic rams on sliding linear bearing tray, (4) 12" swivel tires designed for easy handling. Pinch point psi reader that allows easy control over installation pressures.

Includes:

* Hydraulic Liner Hold-down Bar
* (4) Hydraulic Legs w/ slide-out stabilizers & (4) independent controls
* Built-In A-Station with Seat & Control Valves
* 12V Hydraulic System w/ Marine Gel Cell Battery w/ Trickle Charger
* 1/4" Back Pressure Fitting
* 3" Steam / Air Adapter Fitting
* 12 Volt Winch w/ (4) lifting points for turning the liner
* 2" Stab/Stinger Pipes with B-Station (steam pressure gauge) fittings (needed for use with 6-18 Liner Clamp) - (2SPBS)
* Milwaukee M18 Switch Tank 4-Gallon Back Pack sprayer Modified w/ battery & charger (strongly recommend) - (HLDB-1)
* Pressure Lubricating Tank with valve, regulator, connection hose & sprayer head - (OT5)
* Mineral Oil - 5-Gallon Container - (MO5) (used with the Pressure Lube Tank - OT5)

30 Series Air Inverter/Shooter (Basic) $19,900.00 USD

18-30 Air Inverter - Base Model 30 Series: (inverts / shoots up to 36” CIPP liner) with a single gland. Non- powered roller. (2) Manual Hydraulic rams on sliding linear bearing tray, (4) 12" swivel tires designed for easy handling. Pinch point psi reader that allows easy control over installation pressures.

NOTE: The image in this section shows the accessories added on to a Basic 30 Series Air Inverter/Shooter.  The Basic 30 Series Air Inverter/Shooter is a metal frame along with the necessary accessories as mentioned in this section for the Basic Shooter. This allows you to customize your Shooter to your needs.

The following are accessories recommended for the 30" Series Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• (Double Gland) Hydraulic Ram powered pinch point with control valve & second pressure point reader $ 5995
• 2" Stab/Stinger Pipes without B-Station (optional for use with 6-18 Liner Clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-Station (optional for use with 6-18 Liner Clamp) - (3SP) $125
• 6-18" Liner Clamp (for use with stab pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with Stab Pipe) - (9618LC-HD) $640

60 Series Air Inverter/Shooter - Recommended Package Deal $72,770.00 USD

18-60 Air Inverter - Base Model 60 Series - with a single gland. Non- powered roller. (2) Hydraulic rams, (4) 12" swivel tires designed for easy handling. Pinch point pressure reader. Allows the operator to open the shooter up & return to the pressure that the liner was being installed at. This revolutionary development makes large-diameter lining so much easier!

Includes:

* Hydraulic Liner Hold-down bar
* Power feed roller with fwd/rev and speed control, wrapped with belting.
* 18 HP Gas powered Hydraulic power pack w/ 5 GPM to 8 GPM switchable / 10-gallon Hydraulic tank w/ filter and sight gage
* (4) Hydraulic legs w/ slide-out stabilizers & (4) independent controls
* Built-in "A" station with seat & control valves
* Trailer option with lights, electric jack, adjustable pintle hitch, 15" rims & tires w/ 7500lb axle, electric brakes, front swivel wheels removable for towing
* 1/4" backpressure fitting
* 3" steam / air adapter fitting
* 12 Volt winch w/ (4) lifting points for turning the liner
* Milwaukee M18 Switch Tank 4 Gallon Back Pack sprayer Modified w/ battery & charger (strongly recommend.)
* Pressure lubricating tank with valve, regulator, connection hose & sprayer head
* Mineral Oil - 5-gallon container (MO5)
* Tool Box (tools not included in the Basic Shooter)

IMG_7274

60 Series Air Inverter/Shooter (Basic) $35,000.00 USD

18-60 Air Inverter - Base Model 60 Series - with a single gland. Non- powered roller. (2) Hydraulic rams, (4) 12" swivel tires designed for easy handling. Pinch point pressure reader. Allows the operator to open the shooter up & return to the pressure that the liner was being installed at. This revolutionary development makes large-diameter lining so much easier!

The following are accessories recommended for the 60" Series Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• (Double Gland) Hydraulic ram powered pinch point with control valve & second pressure point reader $ 9995
• Power feed conveyor with fwd/rev and speed control, wrapped with belting w/ 2 lifting cylinders on the rear of the conveyor to tilt the conveyor up & down $12,995
• 2" Stab/Stinger Pipes with B-Station (optional for use with 6-18 liner clamp) - (2SP) $795
• 2" Stab/Stinger Pipes without B-Station (optional for use with 6-18 liner clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-Station (optional for use with 6-18 liner clamp) - (2SP) $125
• 6-18" Liner Clamp (for use with Stab Pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with Stab Pipe) - (9618LC-HD) $640

96 Series Air Inverter/Shooter - Package Deal $141,775.00 USD

18-96 Air Inverter - Base Model 96 Series: (inverts / shoots up to 96” CIPP liner) Basic Model with a single gland. Non- powered roller. (4) Valved Hydraulic rams w/ forward & reverse with hydraulic connection plumbed for auxiliary power pack control, (4) 22.5" tires with (2) stationary and (2) on a steering bar to allow easy placement.
Includes:

* Hydraulic Liner Hold-down bar
* Power feed roller with fwd/rev and speed control, wrapped with belting.
* 18 HP Gas powered Hydraulic power pack w/ 5 GPM to 8 GPM switchable / 10-gallon Hydraulic tank w/ filter and sight gage
* (4) Hydraulic legs w/ slide-out stabilizers & (4) independent controls
* Built-in "A" station with seat & control valves
* Trailer option with lights, electric jack, adjustable pintle hitch, 15" rims & tires w/ 7500lb axle, electric brakes, front swivel wheels removable for towing
* 1/4" backpressure fitting
* 3" steam / air adapter fitting
* 12 Volt winch w/ (4) lifting points for turning the liner
* Milwaukee M18 Switch Tank 4 Gallon Back Pack sprayer Modified w/ battery & charger (strongly recommend.)
* Pressure lubricating tank with valve, regulator, connection hose & sprayer head
* Mineral Oil - 5-gallon container (MO5)
* Tool Box (tools not included in the Basic Shooter)

96 Series Air Inverter/Shooter (Basic) $52,000.00 USD

18-96 Air Inverter - Base Model 96 Series: (inverts / shoots up to 96” CIPP liner) Basic Model with a single gland. Non- powered roller. (4) Valved Hydraulic rams w/ forward & reverse with hydraulic connection plumbed for auxiliary power pack control, (4) 22.5" tires with (2) stationary and (2) on a steering bar to allow easy placement.

The following are accessories recommended for the 96" Series Air Inverter/Shooter (not always included in the package deal): Below is the link for the order form to request for invoice and other details.

• (Double Gland) Hydraulic ram powered pinch point with control valve & second pressure point reader $ 9995
• Power feed conveyor with fwd/rev and speed control, wrapped with belting w/ 2 lifting cylinders on the rear of the conveyor to tilt the conveyor up & down $12,995
• 2" Stab/Stinger Pipes with B-Station (optional for use with 6-18 liner clamp) - (2SP) $795
• 2" Stab/Stinger Pipes without B-Station (optional for use with 6-18 liner clamp) - (2SP) $100
• 3" Stab/Stinger Pipes without B-Station (optional for use with 6-18 liner clamp) - (2SP) $125
• 6-18" Liner Clamp (for use with Stab Pipe) - (9618LC) $540
• 6-18" Liner Clamp - Heavy Duty (for use with Stab Pipe) - (9618LC-HD) $640

Translate »