RESIN & LINERS

 

 

FAST PIPE LINING INC. – One of the leading suppliers for all Cured-In-Place-Pipe lining materials from resin to liners.  In-house Wet-Out system,  providing ready to go resin-saturated liners ready to be delivered in a refrigerated truck to your job site.

RESIN

Our resin range from polyesters to vinyl esters used in cured-in-place pipe applications. Polyester resins are available either filled or unfilled. These resins are most commonly used in the municipal sewer or stormwater line applications. The chemical resistance of this type of resin is perfect for those environments. The flexural creep of these resin systems also exceeds in performance for these environments. 

Types of Resin available at FAST Pipelining

  • Standard Polyester Resin

Styrene base (filled) – Economical use for mainline, large-diameter – Available in 5-gallon bucket, 55-gallon drum (500-lbs), and 300-gallons (2500-lbs) tote.

 

  • Polyester Resin – (Unfilled)

Use for mainline, large-diameter – Available in 5-gallon bucket, 55-gallon drum (500-lbs), and 300-gallons (2500-lbs) tote.

 

  • Vinyl Ester Resin – Styrene Base (Filled)

Available in 5-gallon bucket, 55-gallon drum (500-lbs), and 300-gallons (2500-lbs) tote.

 

  • Non-VOC Vinyl Ester – Non-Styrene Base (Unfilled)

Recommended for residential, schools, restaurants, hospitals & industrial – Available in 5-gallon bucket, 55-gallon drum (500-lbs), and 300-gallons (2500-lbs) tote.

 

  • Epoxy Hardener – Part “A” – B4010T

Available per lbs and 50-lbs bucket/pail.

 

  • Epoxy Hardener – Part “B” – HW1215 – WINTER MIX

Required Gel Time: 12-15 mins – SET TIME: 2 hrs – MASS 150-Grams – Available per lbs and 40-lbs bucket/pail.

 

  • Epoxy Hardener – Part “B” – HW2025 – WINTER MIX

Required Gel Time: 20-25 mins – SET TIME: 3 hrs – MASS 150-Grams – Available per lbs and 40-lbs bucket/pail.

 

  • Epoxy Hardener – Part “B” – HS3035 – SUMMER MIX

Required Gel Time: 30-35 mins – SET TIME: 4 hrs – MASS 150-Grams – Available per lbs and 40-lbs bucket/pail.

 

  • Epoxy Hardener – Part “B” – HS6070 – SUMMER MIX

Required Gel Time: 60-70 mins – SET TIME: 6 hrs – MASS 150-Grams – Available per lbs and 40-lbs bucket/pail.

 

  • Epoxy Hardener – Part “B” – HT5060 – HIGH TEMP (MUST BE STEAM CURED)

Required Gel Time: 50-60 mins – SET TIME: 5 hrs – MASS 150-Grams – Available per lbs and 40-lbs bucket/pail.

 

  • Sharkepox Kit – Standard Epoxy Resin

Recommended for general application – Available in 44-lbs Premixed Bucket/Pail.

Your Resin Order

8 + 1 =

LINERS

Our CIPP liners are have been successfully installed across North America. From Alaska to New York and beyond all Canadian boundaries. From Costa Ricca to Australia.

Your Liner Order

9 + 6 =

Your Patch Kit Order

14 + 2 =